Water Meter Pits and Custom Plastic Tanks
Welded plastic structures designed around the installation, not the other way around.
Overview
Plastic has quietly replaced concrete — and for good reasons
Over the past years, traditional concrete water-meter pits have gradually been replaced by modern plastic chambers. Regulations differ from country to country and region to region, but the underlying principle is the same everywhere: protection against groundwater, long service life, frost resistance and easy installation come first.
We manufacture using welded technology. Welded fabrication makes it possible to realise almost any requirement in terms of dimensions, layout and load capacity — whether the application is residential, multi-dwelling or industrial.
The advantage of plastic meter pits is that they do not corrode, do not crack, do not absorb moisture, and give fast, safe access to the water meter, isolation valves and fittings installed inside.
Key capabilities
- Residential, multi-dwelling and industrial meter-pit concepts
- Welded plastic fabrication to project dimensions
- Integrated pipe penetrations and internal arrangements
- Custom tanks above 30 m³
- Corrosion-free, frost-resistant, no moisture absorption
Beyond meter pits
Custom tanks above 30 m³
Alongside water-meter pits we also manufacture custom plastic tanks for water-utility, industrial and process applications. These can be built in volumes above 30 m³, adapted to the environmental and operating conditions of the specific site.
In our experience, properly designed and executed plastic chambers and tanks significantly reduce maintenance demand while providing a predictable, dependable solution for operators over the long term. Structural design, groundwater conditions, surface loading and the installation method remain decisive for long-term performance.
What we adapt per project
- Custom internal and external dimensions
- Integrated pipe entries and equipment layout
- Loading concept matched to the installation
- Water-utility, industrial and process applications
Production
Welded, not moulded — that is what makes it custom
A moulded chamber comes in the size the mould allows. A welded one comes in the size the project needs. That is the whole difference, and it is why we can cover such a wide range of requirements with the same production method.
The internal arrangement is planned together with the pipe entries, so the meter, the isolation valves and any additional fittings sit where they can actually be reached and serviced — including through our own wall grommets for the pipe penetrations.
Selection & quotation
Information needed for selection and quotation
The more precise the input, the faster and more reliable our technical answer. For non-standard requirements, a drawing or a physical sample is the best starting point.
- Internal and external dimensions
- Burial / installation conditions
- Groundwater level
- Surface and traffic loading
- Pipe entries and equipment to be installed
- Required volume and medium
From the manufacturer
Welded plastic, built around the installation
In recent years the role of traditional concrete water-meter chambers has gradually been taken over by modern plastic ones. Regulations differ from country to country and region to region, but the principle is the same everywhere: protection against groundwater, long service life, frost resistance and easy installation come first.
With the different meter-pit versions we can cover a wide range of requirements. We use welded technology in production. The welded design makes it possible to realise almost any solution to individual requirements — in size, layout and load capacity — whether for residential, multi-dwelling or industrial use.
The advantage of plastic meter pits is that they do not corrode, do not crack, do not absorb moisture, and give fast, safe access to the water meter, shut-off and fitting assemblies placed inside.
Alongside meter pits we also manufacture custom plastic tanks for water-utility, industrial or process purposes. These tanks can be built in volumes above 30 m³, adapted to the given environmental and operating conditions.
In our experience, correctly designed and built plastic pits and tanks significantly reduce maintenance demand while providing operators with a predictable, dependable solution over the long term.
Welded construction, built to project dimensions 
Fast, safe access to the meter and the fittings 
Custom tanks above 30 m³
If this is of interest, we look forward to hearing from you.
FAQ
Frequently asked questions
Cannot find your answer? Send us the technical details and we will review the application.
Can you manufacture a completely custom meter pit?
Yes. Welded fabrication is well suited to custom dimensions, internal arrangements and load requirements.
What is the maximum tank size?
Custom tanks above 30 m³ are possible. Final feasibility depends on geometry, transport and installation conditions.
Why plastic instead of concrete?
Plastic chambers do not corrode, do not crack and do not absorb moisture, and they give faster, safer access to the equipment inside.
Do you supply the internal water-meter assembly as well?
This can be discussed as part of the project depending on the required components.
Related products and information
Send us the technical details, drawings or photos
We will review the application and confirm the most suitable next step.
English (UK) 
Magyar 
Deutsch 
Slovenčina 
Čeština 
Română 
Hrvatski 
Polski